操尽兴况：
[root@linuxidc ~]# uname -a
Linux linuxidc 2.6.32-358.18.1.el6.x86_64#1 SMP Wed Aug 28 17:19:38 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
近况阐明：
系统有两个硬盘，第一个硬盘107G,“/”分区空间其时分区时只给了7.7G过小，空间顿时占完。此刻系统有第二个硬盘sdb巨细为16GB，但愿把sdb的所有空间插手到“/”分区中，是其空间容量从7.7GB酿成7.7GB+16GB（约2.4GB）。（虽然假如这里只有一个硬盘sda,有许多空间尚未利用可以举办同样的操纵）
操纵步调如下：
第一步、查察本机现有分区环境
[root@linuxidc ~]# df -h
文件系统容量已用可用已用%% 挂载点
/dev/mapper/VolGroup-lv_root
7.7G 7.1G 155M 98% /
tmpfs 3.9G 296K 3.9G 1% /dev/shm
/dev/sda1 485M 64M 396M 14% /boot
/dev/sda3 83G 350M 79G 1% /media
第二步、查察本机的磁盘环境
[root@linuxidc ~]# fdisk -l
Disk /dev/sda: 107.4 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x000dc0ad
Device Boot Start End Blocks Id System
/dev/sda1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 64 2089 16264192 8e Linux LVM
/dev/sda3 2090 13054 88076362+ 83 Linux
Disk /dev/mapper/VolGroup-lv_root: 8325 MB,8325693440 bytes
255 heads, 63 sectors/track, 1012 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_swap: 8325 MB,8325693440 bytes
255 heads, 63 sectors/track, 1012 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x00000000
留意：此时还没有在EXSI5.0中添加第二块硬盘
[root@linuxidc ~]#
第三步、添加第二块硬盘
查察此时系统磁盘环境
root@linuxidc ~]# fdisk -l
Disk /dev/sda: 107.4 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x000dc0ad
Device Boot Start End Blocks Id System
/dev/sda1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinderboundary.
/dev/sda2 64 2089 16264192 8e Linux LVM
/dev/sda3 2090 13054 88076362+ 83 Linux
Disk /dev/sdb: 17.2 GB, 17179869184 bytes
255 heads, 63 sectors/track, 2088 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_root: 8325 MB,8325693440 bytes
255 heads, 63 sectors/track, 1012 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_swap: 8325 MB,8325693440 bytes
255 heads, 63 sectors/track, 1012 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x00000000
可以看到我们新添加的硬盘sdb
[root@linuxidc ~]#
第四步、对第二块硬盘sdb举办分区
[root@linuxidc ~]# fdisk /dev/sdb
Device contains neither a valid DOSpartition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with diskidentifier 0xfa4abbdc.
Changes will remain in memory only, untilyou decide to write them.
After that, of course, the previous contentwon't be recoverable.
Warning: invalid flag 0x0000 of partitiontable 4 will be corrected by w(rite)
WARNING: DOS-compatible mode is deprecated.It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibilityflag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOSpartition table
p print the partition table
q quit without saving changes
s create a new empty Sundisklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (expertsonly)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 4
First cylinder (1-2088, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G}(1-2088, default 2088):
Using default value 2088
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
说明：上面操纵对sdb硬盘举办了分区操纵，设为sdb4分区了（虽然上面成立的主分区可觉得1-4中的任意一个，我这里选择的4）。
第五步、对新成立的sdb4分区举办名目
[root@linuxidc ~]# mkfs.ext4 /dev/sdb4
mke2fs 1.41.12 (17-May-2010)
文件系统标签=
操纵系统:Linux
块巨细=4096 (log=2)
分块巨细=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1048576 inodes, 4192957 blocks
209647 blocks (5.00%) reserved for thesuper user
第一个数据块=0
Maximum filesystem blocks=4294967296
128 block groups
32768 blocks per group, 32768 fragments pergroup
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
正在写入inode表: 完成
Creating journal (32768 blocks): 完成
Writing superblocks and filesystemaccounting information: done完成
This filesystem will be automaticallychecked every 20 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
说明：将sdb4分区名目化为ext4名目，，因为CentOS安装是系统的名目ext4，所以这里要留意一下。
第六步、名目后的sdb4分区添加为物理卷
[root@linuxidc ~]# pvcreate /dev/sdb4
Physical volume "/dev/sdb4" successfully created
第七步、查察当前系统的物理卷（PV）环境
[root@linuxidc ~]# pvdisplay
---Physical volume ---
PVName /dev/sda2
VGName VolGroup
PVSize 15.51 GiB / not usable3.00 MiB
Allocatable yes (butfull)
PESize 4.00 MiB
Total PE 3970
Free PE 0
Allocated PE 3970
PVUUID Up77sG-sNKf-Ja0k-crBf-N0wz-a5hy-T6sVFh
"/dev/sdb4" is a new physical volume of "15.99 GiB"
---NEW Physical volume ---
PVName /dev/sdb4
VGName
PVSize 15.99 GiB
Allocatable NO
PESize 0
Total PE 0
Free PE 0
Allocated PE 0
PVUUID Gqnw7N-HooX-S2Nz-1NIZ-YpOe-g0jo-grG1rQ
说明：可以看到添加的新物理卷sdb4，巨细都切合我们添加时的配置
第八步、查察当前卷组环境
[root@linuxidc ~]# vgdisplay
---Volume group ---
VGName VolGroup
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 3
VGAccess read/write
VGStatus resizable
MAXLV 0
CurLV 2
Open LV 2
MaxPV 0
CurPV 1
ActPV 1
VGSize 15.51 GiB
PESize 4.00 MiB
Total PE 3970
Alloc PE / Size 3970 / 15.51GiB
Free PE / Size 0 / 0
VGUUID PPrifh-glzl-nnxX-YkBm-xJ1s-rgnw-d1WsJd
第九步、将分区sdb4转换为扩展分区
[root@linuxidc ~]# vgextend VolGroup /dev/sdb4
Volume group "VolGroup" successfully extended
第十步、查察当前的逻辑卷
[root@linuxidc ~]# lvdisplay
---Logical volume ---
LVPath /dev/VolGroup/lv_root
LVName lv_root
VGName VolGroup
LVUUID dCIsej-0NWX-bVFe-bT6L-c4eY-oy4G-9lNBOC
LVWrite Access read/write
LVCreation host, time ,
LVStatus available
#open 1
LVSize 7.75 GiB
Current LE 1985
Segments 1
Allocation inherit
Read ahead sectors auto
-currently set to 256
Block device 253:0
---Logical volume ---
LVPath /dev/VolGroup/lv_swap
LVName lv_swap
VGName VolGroup
LVUUID K5bxJo-2SmM-6NCU-mBJP-Qzp1-ZODH-nbLK0k
LVWrite Access read/write
LVCreation host, time ,
LVStatus available
#open 1
LVSize 7.75 GiB
Current LE 1985
Segments 1
Allocation inherit
Read ahead sectors auto
-currently set to 256
Block device 253:1
说明：这里可以看到“/”根分区的路径名称为：/dev/VolGroup/lv_root
第十一步、查察扩展后的卷组环境
[root@linuxidc ~]# vgdisplay
---Volume group ---
VGName VolGroup
System ID
Format lvm2
Metadata Areas 2
Metadata Sequence No 4
VGAccess read/write
VGStatus resizable
MAXLV 0
CurLV 2
Open LV 2
MaxPV 0
CurPV 2
ActPV 2
VGSize 31.50 GiB
PESize 4.00 MiB
Total PE 8064
Alloc PE / Size 3970 / 15.51GiB
Free PE / Size 4094 / 15.99 GiB
VGUUID PPrifh-glzl-nnxX-YkBm-xJ1s-rgnw-d1WsJd
说明：扩展后的卷子环境，可以看出巨细增加了16GB（与第八步中的比拟）
第十二步、将新增的逻辑卷全部扩展到“/”分区中
[root@linuxidc ~]# lvextend -L +15.99G /dev/VolGroup/lv_root
Rounding size to boundary between physical extents: 15.99 GiB
Extending logical volume lv_root to 23.75 GiB
Logical volume lv_root successfully resized
说明：这里sdb4总共有16G，所以把16BG全部添加给根分区。
第十三步、查察“/”根分区名目，并从头刷新根分区的巨细
[root@linuxidc ~]# e2fsck -f /dev/VolGroup/lv_root
e2fsck 1.41.12 (17-May-2010)
/dev/VolGroup/lv_root is mounted.
e2fsck: 无法继承, 中止.
[root@linuxidc ~]# resize2fs /dev/VolGroup/lv_root
resize2fs 1.41.12 (17-May-2010)
Filesystem at /dev/VolGroup/lv_root ismounted on /; on-line resizing required
old desc_blocks = 1, new_desc_blocks = 2
Performing an on-line resize of/dev/VolGroup/lv_root to 6224896 (4k) blocks.
The filesystem on /dev/VolGroup/lv_root isnow 6224896 blocks long.
说明：呼吁resize2fs即刷新根分区“/dev/VolGroup/lv_root”的容量。
第十三步、查察刷新后根分区的巨细
[root@linuxidc ~]# df -h
文件系统容量已用可用已用%% 挂载点
/dev/mapper/VolGroup-lv_root
24G 7.1G 16G 32% /
tmpfs 3.9G 144K 3.9G 1% /dev/shm
/dev/sda3 83G 350M 79G 1% /media/Lucene
说明：可以看到根分区的巨细有7.7G酿成了24G，重启一下系统再来看环境。此时就可以继承安装软件了，不会提示空间不敷了。
